Jewelry spatulas and chisels
Jewelry spatulas and chisels are used to model wax and to shape and finish cast metal; types, uses and sharpening.
Spatulas and chisels are hand tools for shaping and touching up: the first usually work wax, the second metal.
Wax spatulas #
They are heated to add, smooth or remove wax on a model. They come in different shapes (point, spoon, blade) and are used with an alcohol lamp or an electric heater.
Chisels and gravers #
Steel rods with a cutting tip, pushed by hand or struck with a hammer. They are used to clean the cast piece, remove burrs and mark or engrave details.
Sharpening #
A well-sharpened tool cuts with less effort and leaves a clean finish. They are sharpened with fine-grit stones and lubricated.
Safety #
Always work with the tool directed away from you and hold the piece firmly. Wear glasses to protect your eyes from chips.
What each is used for #
- Wax spatula: heated in an alcohol lamp flame and applied to wax to join, fill or smooth.
- Flat chisel: smooths and marks metal.
- Graver: cuts fine lines.
- Scraper: scrapes and cleans.
How to work wax #
Heat only the tip, touch the wax and withdraw. A spatula that is too hot burns the model. Then smooth with a piece of nylon and finish with gentle heat.
See also #
This entry was drafted with the help of AI and is pending review by the author.