# Jewelry spatulas and chisels

> Jewelry spatulas and chisels are used to model wax and to shape and finish cast metal; types, uses and sharpening.

- Source: https://www.711grados.com/en/spatulas-and-chisels/
- Language: en
- Note: This entry was drafted with the help of AI and is pending review by the author.
- Published: 2026-07-20
- Updated: 2026-07-20
- Translation (es): https://www.711grados.com/es/espatulas-y-cinceles/
- Author: Sandra Sánchez
- Site: 711 Grados (https://www.711grados.com/)

---

Spatulas and chisels are hand tools for shaping and touching up: the first usually work wax, the second metal.

## Wax spatulas

They are heated to add, smooth or remove wax on a model. They come in different shapes (point, spoon, blade) and are used with an alcohol lamp or an electric heater.

## Chisels and gravers

Steel rods with a cutting tip, pushed by hand or struck with a hammer. They are used to clean the cast piece, remove burrs and mark or engrave details.

## Sharpening

A well-sharpened tool cuts with less effort and leaves a clean finish. They are sharpened with fine-grit stones and lubricated.

## Safety

Always work with the tool directed away from you and hold the piece firmly. Wear glasses to protect your eyes from chips.

## See also

- [Lost-wax casting](https://www.711grados.com/en/lost-wax-casting/)
- [Hand and laser engraving in jewelry](https://www.711grados.com/en/engraving-in-jewelry/)
- [Jewelry drills and burs](https://www.711grados.com/en/jewelry-drills-and-burs/)